Page 7 - Ergonomic Solutions

100 Ground Lift Scissor Tables
ERGONOMIC SOLUTIONS
CA Residents see
WARNING A, Pg. 459
SPECIALTY FINISHES
AVAILABLE,
CONTACT FACTORY
45° END TILT Custom Finish
model EHLTT-4848-3-47 Available
45° SIDE LINK TILT
model EHLTTS-3654-2-48
90° HINGE TILT
model EHLTT-H-4848-2-47
460V 3-PHASE STD, OPTIONS ON PG. 108
pallet trucks and raised to an ergonomic working height. Lowered height is 1/2". Safety features
Designed for use when fork trucks are not available. Pallets can be loaded onto the platform with
include; entry-side electric toe guard to protect pinch points during lowering of the table, safety
velocity fuse to maintain platform height in the event of a hose or fitting failure, foot control,
maintenance prop, and upper travel limit switch to stop table at maximum height reducing motor
wear. 2HP, 460V, 3-phase, 60 Hz totally enclosed motor is standard, other voltages available. Remote
power unit can be located up to eight feet away from table. 3000 psi hydraulic components rating.
Optional accordion skirting available, contact factory. See options on page 108 & 109.
UNIFORM
PLATFORM
MODEL
OVERALL SIZE
(W x L x H)
(LBS.)
HEIGHT
HEIGHT
CAPACITY
SIZE (W x L)
NUMBER
EHLTG-3850-2-36
½"
1510
36"
EHLTG-3850-4-36 38" x 51½" 2,000 lb. RAISED LOWERED 61" x 56" x 8½" WEIGHT
1644
38" x 51½"
4,000 lb.
36"
½"
61" x 56" x 8½"
EHLTG-4450-2-36 44" x 51½" 2,000 lb. 36" ½" 67" x 56" x 8½" 1573
EHLTG-4450-4-36 44" x 51½" 4,000 lb. 36" ½" 67" x 56" x 8½" 1707
EHLTG-5250-2-36 52" x 51½" 2,000 lb. 36" ½" 75" x 56" x 8½" 1717
EHLTG-5250-4-36 52" x 51½" 4,000 lb. 36" ½" 75" x 56" x 8½" 1729
EHLTG-4470-2-48 44" x 73" 2,000 lb. 48" ½" 67" x 78" x 10 /16" 2216
7
EHLTG-4470-4-48 44" x 73" 4,000 lb. 48" ½" 67" x 78" x 10 /16" 2242
7
EHLTG-5270-2-48 52" x 73" 2,000 lb. 48" ½" 75" x 78" x 10 /16" 2322
7
EHLTG-5270-4-48 52" x 73" 4,000 lb. 48" ½" 75" x 78" x 10 /16" 2348
7
OPTIONS
HH2PB-8-FC2 HAND HELD PENDANT CONTROL (FOOT CONTROL STD.) 2
EHLTG-44-SB STEEL ROLLOVER BRIDGE / 44"W DECKS 36
(12"Long / Cap. 3,000 lb.)
EHLTG-52-SB STEEL ROLLOVER BRIDGE / 52"W DECKS 42
(12"Long / Cap. 3,000 lb.)
OPTIONAL ONE OR LIFT & TILT ACCORDION
TWO PIECE SKIRTS AVAILABLE,
ACCORDION SKIRT, CONTACT FACTORY
CONTACT FACTORY
Lift & Tilt Scissor Tables 460V 3-PHASE STD, OPTIONS ON PG. 108
Performs both lifting and tilting operations. 45° and 90° tilt available. Restraining chain and
12" high lip to keep the load in place during tilting. Safety features include: electric toe guard
to protect worker from pinch points during lowering of table, safety velocity fuses to hold
platform position in event of hose or fitting failure, 4 push-button hand pendant control on an
8 foot coil cord, upper limit switch to stop travel at maximum height reducing motor wear, and
maintenance prop. Optional accordion skirting available for both the lifting and tilting portions
of the table, contact factory. See options on page 108 & 109.
MODEL PLATFORM UNIFORM RAISED LOWERED OVERALL WEIGHT
NUMBER SIZE (W x L) CAPACITY HEIGHT HEIGHT SIZE (W x L) (POUND)
45° END TILT
EHLTT-3648-1-47 36" x 48" 1,000 lb. 47" 11" 36" x 56" 1208
EHLTT-4848-1-47 48" x 48" 1,000 lb. 47" 11" 48" x 56" 1228
EHLTT-3648-2-47 36" x 48" 2,000 lb. 47" 11" 36" x 56" 1204
EHLTT-4848-2-47 48" x 48" 2,000 lb. 47" 11" 48" x 56" 1235
EHLTT-3648-3-47 36" x 48" 3,000 lb. 47" 11" 36" x 56" 1299
EHLTT-4848-3-47 48" x 48" 3,000 lb. 47" 11" 48" x 56" 1251
EHLTT-3648-4-47 36" x 48" 4,000 lb. 47" 11" 36" x 56" 1206
EHLTT-4848-4-47 48" x 48" 4,000 lb. 47" 11" 48" x 56" 1282
EHLTT-4848-5-47 48" x 48" 5,000 lb. 49" 13" 48" x 56" 1482
45° SIDE LINK TILT
EHLTTS-3654-2-48 36" x 54" 2,000 lb. 48" 12" 38" x 54" 1238
EHLTTS-3654-4-48 36" x 54" 4,000 lb. 48" 12" 38" x 54" 1500
90° HINGE TILT
EHLTT-H-3648-2-47 36" x 48" 2,000 lb. 47" 11¼" 36" x 53" 1179
EHLTT-H-4848-2-47 48" x 48" 2,000 lb. 47" 11¼" 48" x 53" 1268
LIFT & TILT SCISSOR TABLE OPTIONS
MODEL WEIGHT
NUMBER DESCRIPTION (POUND)
FC-4 FOUR PEDAL FOOT CONTROL (LIFT & TILT PRODUCTS) 6
EHLTT-ROTARY-WMPB AIR/OIL POWER W/PNEUMATIC PUSH-BUTTON* 36
*FILTER - REGULATOR - LUBRICATOR REQUIRED TO OPERATE UNIT